Can I Remove Mould and Mildew from Walls and Remove Stains?
There is Mould or mildew on home walls is quite common, and it is because of seepage, the presence of moisture and poor ventilation, etc. They are moulds, which grow fast due to persistent wetness, lack of sunlight and presence of mould spores in the air. Mould/Mildew is not only aesthetically displeasing, but also unhealthy for animals and people. It has spores that can lead to blockages in breathing, a runny nose, allergies, and numerous other illnesses. This way, the health of the entire household will require the walls with mould/mildew growth to be cleaned. What do you do when you want to get mould and mildew off walls and clear the stains? Should the problem of infestation be large, and it may be your last week in tenancy, then it is the best move to contract the services of mould remediation experts.
How to eliminate Mould and Mildew Stains from Walls
You may call a trusted rental Bond cleaning Perth company and ask them whether they offer mould cleaning together with the bond cleaning. In case you believe the spots are minor and you can wash them, then here is your full guide from the professional cleaners. It also has information on the difference between mould and mildew, effective methods of eliminating them and prevention tips.
What is the distinction between Mould and Mildew?
Both mould and mildew are fungi; still, they have various visual styles. Mildew is white/grey/yellow and, in most cases, seldom does it cause permanent damage to the surface it is growing on. Mould on its part is black or green and leads to rot, which is why it is prudent to take some quick steps when you find black/green patches on the walls. As well, mould will have increased chances of discolouring a spot if it fails to be dealt with on time.
Applicable Tips on How to Remove and Clean Up Stains of Mould/Mildew
Dealing with mildew is less challenging than mould, but on a very large scale, the elimination of both can be achieved with proper equipment, products and procedures. The items that you will require in treating the spots and stains include water, bleach, white vinegar, a stiff-bristle brush, spray bottles, dishwashing liquid, microfiber cloths, and protective gear. Once you have collected the supplies, then clean (treat) a spot of mould or mildew using any of the following methods of handling mould or mildew in the walls of your house. You should wear gloves, gogs, a mask and protective overalls when cleaning the spots.
The Bleach and Water Removal technique
Bleach is a strong solution capable of killing fungus, and it is perfect for removing mould and mildew. Mix 1 part bleach impregnated in a bottle with three parts of water, shaking the solution properly. Before using the solution to cover the infected area, make sure the room is properly aerated since bleach vapours are likely to cause inflammation of the eyes and respiratory system. Saturate the fungus with the solution for at least 10-15 minutes and rub off the stains using a brush. Most end-of-lease cleaners in Perth use this trick to spot clean walls of mould/mildew growth. Clean the spots with spray water, and in case they do not come off successfully at the very first use of the bleach-water solution, then repeat the stain.
Instant Spot Cleaning Technique
When you notice the mould spots, you should treat them immediately and be active. Thus, make sure to have sponges, brushes, a mild cleaner and cotton rags as well as disposable wipes ready to eliminate spots at early stages. One should make it a habit to inspect the ceilings, walls, floors, attic, basement, bathroom, kitchen and other places where mould can grow damp and where mould spores can form. Check these places to see the spots on them, and in case you see some, wear them, put on gloves and spray the surface with the cleaning solution and scrub the residues with a sponge or brush. Use a cotton rag or disposable tissue to wipe the mess.
Prevention Tips for Mould or Mildew Growth
You can employ professional cleaners to treat the infestation or do it yourself when cleaning the mouldy/mildewy area, but it is important to treat the area to avoid recurrence. The following are some of the ways to go about it.
- Repair on the occurrence of water damage or water seepage, which may render the walls wet and prone to mould/mildew infestation
- Make the place dry and well ventilated.
- Once you have cleaned an area that had growth of fungus, you should spray pure white vinegar on it and allow it to air dry. The vinegary aroma will evaporate when the solution dries and it will avert the reoccurrence of the spots.
- In case you are on the final stages of tenancy and you have paid professional end of leasing cleaners in Perth, they will do spot cleaning of walls having small stains.
- Otherwise, the walls of bathroom or kitchen or some other parts of the home, where there may be moisture or dampness, may use mould-resistant paints.
Wrapping Up
It is necessary to remove the mould or mildew on the walls of your home to ensure that all the people in the home are healthy. Besides this, it is mandatory since mouldy walls are ugly and embarrassing. Among those who are tenants, the infestation of mould/mildew is also a major issue. Hence, it is important to clean the spots when they are minor by offering the above-mentioned information. Professional cleaners ought to be employed to remediate mould where the infestation is huge. As soon as possible, it is important to remove mould and mildew on walls with the help of effective and harmless treatment via vinegar or baking soda. Cleaning regularly, adequate ventilation and moisture prevention are also the secrets to eliminating regrowth and ensuring that your walls are free and clean of any stain.