When did you last get into your bathroom and think about how you could restore the lost lustre of your fibreglass shower? Is your fibreglass shower grey, stained or has soap scum and water spots on it? If so, you are not alone. This is the same issue with most homeowners, as fibreglass tends to showcase dirt and grime more than any other surface. It is a highly delicate and gentle kind of texture, too, and it is easily damaged by rough washing or heavy chemicals. And this is the reason why it always appears as an uphill task to keep a fibreglass shower.
The good thing is that with the right routine, you do not have to spend money on expensive things or exhaust your body to make your fibreglass shower look new. Here in this blog, you will find the uncomplicated step-by-step method that can help you in cleaning your shower and maintain the shine of the shower for many years. You can put minimal effort and do regular care for a fresh and clean fibreglass.
Step 1: Collect All the Materials
The first step is to prepare everything as in any other job, as per bond cleaning perth. In this case, white vinegar, soft bathroom cleaner, non-abrasive cloth sponge or cloth, baking soda, soft-bristle brush, and spray bottle will be needed. Fibreglass is quite easy to scratch, thus make sure not to use any scrubbing pad or any cleaners that are chemical-based. You save time and effort to prepare your materials, which is wasted on cleaning.
Step 2: Wash the Shower Completely.
You can start by showering your fibreglass shower with warm water and then any cleaner. This helps to remove any dirt and hair, and any trace of soap. This is necessary to get the surface ready, and therefore, your cleaning product can perform its work. Scan the corners, the drain and the foundation of the shower, as these are the spots where build-up is likely to occur. During rinsing, softening of the soap scum also takes place and contributes to the following cleaning processes.
Step 3: Use Gentle Cleaners
Now time to put on the cleaning solution. When using a fibreglass shower, a safe solution is a white vinegar-and-water (half and half) solution in a spray bottle. Spray the surface evenly and leave the surface to dry for 10 to 15 minutes. Vinegar can help to clean soap scum, water spots and mildew. On more difficult stains, sprinkle your sponge with a bit of baking soda and scrub the spots. The vinegar and baking soda mixture is good and mild enough for your fibreglass.
Step 4: Scrub with Care
Allow time to pass by and then clean the fibreglass shower using a soft-bristle brush or sponge. This scrubbing should be done in a circle and no steel wool or coarse brush should be used that would scratch things.
Step 5: Rinse and Dry
Wipe by shower when scrubbing fibreglass. Test to see whether all the cleaning residue, baking soda, and other dirt loosened by scrubbing have been washed off. After rinsing the shower, you can then go ahead and use a new cloth or towel made of microfibers and wipe the surface.
Step 6: Deal With Persistent Stains
In some cases, your fibreglass shower may have stains and discolourations that cannot be treated using ordinary maintenance. Here, a mix of water and baking soda should be used. Paste the part which is stained and leave it to dry for 2030 minutes, and scrub the part. This is an excellent procedure to apply to fibreglass, and it is not dangerous because it will eliminate hard-to-clean dirt. Avoid using strong chemicals and bleach because they may cause yellowing of the leaf or other damage.
Step 7: Ongoing Maintenance
It is the key to maintenance in keeping your fibreglass shower clean. Instead of waiting until your fibreglass is obviously dirty to do any maintenance, have a cleaning schedule once a week. Spraying the surface with a batch of vinegar-and-water would suffice to prevent the occurrence of soap scrum, mould and other accumulation. The more intense form of cleaning maintenance will depend directly on how consistent you are with this routine.
Additional Tip: Minimise Future Building
Another simple thing that can save your fibreglass shower even after it is already damaged is wiping down the fibreglass shower walls and doors with a squeegee after every shower. Showering water after every showering session can prevent additional damage to the fibreglass shower walls and the glass doors. Shower sprays that repel water and prevent soap scums and hard water stains can also be very helpful. Similarly, a few Clean Drain Hacks can go a long way in keeping the drain fresh and clog-free.
Conclusion
You do not need to be stressed by the idea of cleaning a fibreglass shower. It can be kept shiny with safe products, correct tools, and regular, and guidance from Bond Cleaning Sunshine Coast, it can always stay shiny and fresh.
So when you next go into your bathroom, stop paying attention to the boring stains or soap traces. Follow this road map and you will enjoy not having stains in your fibreglass shower on a daily basis.